Garage Door Motor Replacement in Dickinson, ND | Garage Door USA
from $279
Garage Door Garage Door Motor Replacement Dickinson, ND
Opener motor and gear-assembly replacement when the unit can be salvaged, or full opener swap when it can't. We size the new motor to your door weight (1/2, 3/4, or 1.25 HP).
Garage Door Motor Replacement is one part of our garage door opener coverage in Dickinson, ND. For the full picture — symptoms, costs, and when to repair vs. replace — start with the complete Garage Door Opener Repair guide, or browse every garage door opener service we offer.
Garage Door Garage Door Motor Replacement Dickinson, ND
We handle garage door motor replacement across Dickinson year-round. The local reality — harsh winters with heavy snowfall and ice, brief mild summers, and severe freeze-thaw stress much of the year — guides which springs, rollers, and seals we install.
Garage doors in Stark County live with harsh winters with heavy snowfall and ice, brief mild summers, and severe freeze-thaw stress much of the year. For Dickinson that means watching for cold-thickened opener grease that bogs down the motor, heavy snow load and ice on doors and tracks, and snowmelt and road salt that rust low brackets; we factor it into every repair and every new-door spec.
Dickinson homeowners usually call us about one of a few things: ice- and snow-jammed tracks, snow-load strain on tracks and brackets, doors iced to the slab on sub-zero mornings, and rusted hardware from repeated snowmelt and road salt. We diagnose the real cause — not just the symptom — before quoting a flat rate.
Motor replacement is the right move when the opener's motor or gear assembly has failed but the rest of the unit (logic board, rail, sensors, remotes, wall console) is still in good shape. On a 6–9 year old LiftMaster or Genie, motor or gear replacement is typically 40–60% the cost of a full opener swap and gives you another 8–10 years of life. We carry motor and gear assemblies for the major brands and most models from the last 12 years.
Sizing matters. A motor sized for a light non-insulated 8x7 door will burn out fast on a heavy insulated 16x7. We size replacements by measured door weight: 1/2 HP for light residential, 3/4 HP for standard insulated, 1.25 HPS for heavy insulated or oversized doors. If the original opener was under-sized, we recommend an upgrade rather than matching the underspec original.
After motor replacement, we re-program travel limits, re-calibrate force settings, and verify auto-reverse on an obstruction test. The full visit takes 90–120 minutes including these checks. We include a 2-year parts and labor warranty on the motor replacement.
Signs you need garage door motor replacement
Motor hums, door doesn't move
Capacitor failure (cheaper fix) or motor windings (full motor needed). Diagnostic determines which.
MyQ, HomeKit, Alexa — control your door from anywhere.
Burning smell during operation
Stop using the opener — motor is overheating, possibly due to gear strip or under-sized motor on heavy door.
Audible grinding from motor housing
Gear assembly stripping or bearing failure. Continued use destroys the gear; immediate service preserves a $149 gear swap vs. a $349 motor replacement.
Door moves slower than it used to
Worn motor windings can deliver less torque, causing slow travel. Diagnostic confirms motor vs. unrelated issues.
Smoke from motor housing
Severe motor failure or wiring fault — unplug immediately and call for emergency service.
Common causes & what we fix
Capacitor age
Start capacitors dry out over 7–10 years and stop providing torque to the motor. Often misdiagnosed as motor failure. $25–$89 capacitor swap usually fixes.
Gear assembly wear
Nylon worm gears strip after years of cycles. The gear, not the motor, is failing — gear replacement is much cheaper than motor replacement.
Motor winding burnout
Genuine motor failure from over-load on heavy doors or sustained operation against an obstructed door. Replacement is the fix.
Power surges
Grid events damage motor electronics. Surge protection prevents the most common failures.
Bearing failure
Motor bearings fail at 12–15 years on average. Replacement is possible but often makes more sense as full motor swap.
Our process
1
Call or schedule online. Book your garage door motor replacement in Dickinson online or by phone and pick a 2-hour window. We confirm in under 5 minutes with the assigned tech's name and photo.
2
On-site diagnosis. Step two is an honest garage door motor replacement diagnosis at your home — free for most repairs, $39 on minor calls (refunded if you proceed) — so you approve the fix with eyes open.
3
Flat-rate quote. A written flat-rate garage door motor replacement estimate comes before the wrenches do. Because techs are salaried, there's no incentive to pad the job — what's quoted is what's charged.
4
Same-visit fix. Garage door motor replacement in Dickinson is typically one-and-done, backed by a 96% first-call fix rate. We test the door with you and clean up fully before we leave.
How much does garage door motor replacement cost in Dickinson, ND?
Garage Door Motor Replacement in Dickinson starts at $279, quoted as a flat rate in writing before any work begins — no hourly creep and no surprise add-ons. The estimate is good for 30 days, so you can compare it on your own timeline. We keep garage door motor replacement affordable across Dickinson, ND — one flat number quoted up front, the same one you pay at the end.
Garage Door Motor Replacement the United States starts at from $279, with the full garage door motor replacement price written down and locked before we start — there's no hourly meter and nothing bolted on later. We take 10% off labor for seniors (65+) and military, and jobs over $1,500 qualify for 0% APR Synchrony financing for 12 months, approved fast with no prepayment penalty.
Why homeowners in Dickinson, ND choose us for garage door motor replacement
Garage Door Motor Replacement in Dickinson should be simple — show up on time, quote before working, fix it once. That's how we've run since 1974 across North Dakota's cold northern climate, with a 96% first-call fix rate. We're the garage door motor replacement company Dickinson calls first — CSLB-licensed, insured, and based right here in Stark County.
We stand behind garage door motor replacement with a 10-year workmanship guarantee, kept separate from the part makers' own warranties. If the garage door motor replacement we did ever fails because of our work, we return and make it right for free across that whole decade. High-cycle 30,000 springs are lifetime-warrantied for the original homeowner; parts and accessories carry 1–5 years.
We earn trust on garage door motor replacement by quoting straight — no up-sell, salaried (not commissioned) technicians, and a diagnostic structured so you see exactly what we see. When a repair is right we recommend the repair; when replacement is the smarter long game, we say that. The flat-rate garage door motor replacement quote is written and valid for 30 days.
Areas we serve for garage door motor replacement
We provide garage door motor replacement throughout Dickinson, ND and the surrounding Stark County area. Serving Renaissance Zone and surrounding neighborhoods.
Need more than garage door motor replacement? Our Dickinson, ND garage door company page is the local hub for every repair, install, and opener job we handle across Dickinson — start there for the full service lineup.
A note on the area for garage door motor replacement: Dickinson lies within Stark County, in North Dakota. Our Dickinson crews work that whole footprint daily, out to Beulah, Bowman, Hazen, and Hettinger.
Our Stark County garage door motor replacement footprint puts Dickinson at the center and Beulah, Bowman, Hazen, and Hettinger within easy reach — one number, any day of the week. We handle garage door motor replacement around 58601 and the rest of Dickinson, ND on one daily route.
Garage Door Motor Replacement near you in Dickinson, ND
The honest answer to "garage door motor replacement near me" in Dickinson: a crew that already drives Renaissance Zone and the surrounding Dickinson area. Local means we arrive sooner, price fairer, and stand behind the work because we'll be back in the neighborhood tomorrow.
Dickinson is part of our greater Fargo, ND metro service area.
We handle garage door motor replacement across ZIP codes 58601, 58602 and beyond. Expect your garage door motor replacement ETA to depend on Dickinson traffic; we'll pin it down accurately the minute you call. One number reaches an on-call technician directly — there's no voicemail standing between you and a fix. Searching "garage door motor replacement near me" in Dickinson? You've found a genuinely local Stark County crew, not a lead broker.
Frequently asked about garage door motor replacement
Top questions homeowners searching for Garage Door Motor Replacement near me ask us:
Dickinson sits in harsh winters with heavy snowfall and ice, brief mild summers, and severe freeze-thaw stress much of the year. That is hard on a door — cold-thickened opener grease that bogs down the motor, heavy snow load and ice on doors and tracks, and snowmelt and road salt that rust low brackets all accelerate wear on springs, seals, and openers, so the failures we see most here are ice- and snow-jammed tracks, snow-load strain on tracks and brackets, doors iced to the slab on sub-zero mornings, and rusted hardware from repeated snowmelt and road salt. We size springs and seals for North Dakota's cold northern climate conditions rather than a generic catalog spec.
Dickinson runs a mixed-age housing stock (median build year 1987), roughly 39% pre-1980, so we see both first-generation doors and aging replacements.
2 years parts and labor on motor replacement. Manufacturer coverage on the motor itself varies (LiftMaster 5–10 years, Genie 5 years).
90–120 minutes including diagnostic, motor swap, travel and force programming, and obstruction test.
Under 8 years old: motor swap almost always. 8–12 years: depends on overall condition. 12+ years: full opener replacement usually better long-term.
Yes — capacitor test is part of the diagnostic. If it's just the cap, you save the motor replacement cost.